UL Certification GPO3 Fiberglass Sheet Machined Parts High Flexture Strength
-
High Light
polyester sheets
,glass reinforced polyester sheet
-
IEC StandardUPGM203
-
PTI Proof Tracking Index PTI≥600 V
-
Toxicant(Emission Halogen Etc.)Low
-
The Anti Microbial Properties Of BacteriaGood
-
Specific Gravity2g/cm3
-
Water Absorption≤0.5%
-
Tensile Strength≥130Mpa
-
Compressive Strength≥300Mpa
-
Place of OriginChina
-
Brand NameHongcheng
-
CertificationUL（E344098）/RoHS 2.0 /Reach/SGS
-
Model NumberGPO-3
-
Minimum Order Quantity50pcs
-
Packaging Detailspallet / carton / case
-
Payment TermsT/T
-
Supply Ability100pcs per day
UL Certification GPO3 Fiberglass Sheet Machined Parts High Flexture Strength
Red GPO3 Fiberglass Sheet machined parts have UL certification high flexture strength
Product Introduction:
GPO3 laminate sheet aslo known as UPGM 203, it is alkali-free fiberglass mat dipped into unsaturated polyester resin adding relevant chemical agent as the basic material pressed under high temperature molded into rigid panel as insulating material. It has good electrical property under high humidity and high mechanical property under medium temperature, fine fire retardant property, good arc resistance and tracking resistance.
Feature:
Application:
it is applicable for making insulation structure components or parts in F-class electric motors,transformer,switchgear,circuit breakers and electrical equipments. UPGM can be moulded into all kinds of structure parts or profiles as per customer's special requirement.
| Hong Cheng Grade | HC-GPO3 | |||
| IEC 893 / EN 60893 Grade | UP GM 203 | |||
| DIN 7735 Grade | HM 2471 | |||
| ANSI (NEMA) Grade NEMA LI-1 | GPO-3 | |||
| Items | Test Method | Unit | Typical Values | |
| Physical Properties | Color | Visual inspection | ---- | Red/White/Brown/Grey |
| Specific Gravity | IEC 60893-2:2003 | g/cm3 | 1.95-2.05 | |
| Water absorption | ISO62:2008 | % | ≤0.5 | |
| Mechanical properties | Tensile Strength | IEC 60893-2:2003 | Mpa | ≥130 |
| Compressive strength | IEC 60893-2:2003 | ≥300 | ||
| Flexural Strength | IEC 60893-2:2003 | ≥180 | ||
| Impact strength | IEC 60893-2:2003 | KJ/m2 | ≥60 | |
| Electrical properties | Volume Resistivity | IEC 60093:1980 | Ω·m | ≥ 1.0 x 1010 |
| Surface Resistivity | IEC 60093:1980 | Ω | ≥ 1.0 x 1012 | |
| Electric Strength ┴ | IEC 60893-2:2003 | kV/mm | ≥ 12 | |
| Breakdown Voltage // | IEC 60893-2:2003 | kV/25mm | ≥ 80 | |
| Arc Resistance | IEC 61621:1997 | sec | ≥180 | |
| PTI Proof Tracking Index PTI | IEC 60893-2:2003 | --- | ≥600 | |
| Dielectric Constant | IEC 60893-2:2003 | --- | 4.0-5.0 | |
| tgδ Dissipation Factor | IEC 60893-2:2003 | --- | ≤0.03 | |
| Thermal properties | Coefficient of Thermal Expansion | ASTME 228-11 | 1/K | ≤2x10-5 |
| Temperature Index | IEC 60085:2004 | ℃ | 155 | |
| Flame Resistance performance | Oxygen Index | ISO 4589-2:1996 | %O2 | ≥ 30 |
| Flame Resistance | IEC 60893-2:2003 | --- | V-0 | |
| Toxicant(Emission halogen etc.) | E662 | --- | Low | |
| Other properties | The anti microbial properties of bacteria | G21-G22 | --- | good |
Red GPO3 Fiberglass Sheet machined parts can be used as
1. Groove shape,horn,square tubes,square sticks,pipe,round rods
2. Available in medium and high voltage inverter,converter,high-voltage switchgear service such as main insulation materials
3. Used as pillar, beams,cable trough etc.
4. Breaker safety baffle,safety cover board,interval liner,alternate with clapboard,arc plate of arcing chamber etc.
5. Motor armature components and self-sealing cover-plate,slot wedge stator,calm gaskets,thin gasket,carbon brush stands,and so on.
6. The front-end switchgear, and back-end,top and bottom,alternate with clapboard,etc.
7. Structural parts for arc resistance and insulation support pieces.
Certification of Unility National Patents
ISO9001 ISO14001 OHSAS18001 certification
Our company is located in Xiang’an manufacture base of Xiamen Special Economic Zone.It is a national hi-tech enterprise with the ability to R&D,production,sale and further processing,we has became the solver of electric insulation technology project .We have more than one hundred machines including CNC and Digital controlled lathe.every kinds of Bending machine,Punching machine,have establish the completely production chain of design and precision further processing .We are the only modernization company in the country which is totally operated by Numerical control in respect of material production and the process for non-metallic insulating spare parts.All of the products have gained the UL certification of the USA,The French national standard certification,CEMT,RoHS,Reach and many national& international authoritative organization certification.This provides an stability guarantee of material for further
Our services cover all industries and reach all parts of the world.